1999 gmc yukon denali amp

Home / the12volt's Install Bay / Car Audio / 1999 gmc yukon denali amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tyma1026

Member - Posts: 9

Joined: July 22, 2003

Location: United States

Posted: April 19, 2007 at 12:26 PM / IP Logged

I have a 1999 GMC Yukon Denali. I have a bose factory radio at the moment but I want to install an aftermarket stereo receiver, a couple of amps and subs. I have tried this before and the radio played but the cd would not play at all. I was told by someone that I have to bypass the factory amp. How would I go about bypassing the amp? Do I need a line convertor? I also read something about an amp turn on wire which is a pink wire. What would I need to do with that wire? Add a 12 volt source to it? Any help would be greatly appreciated. Thank you

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: April 19, 2007 at 6:20 PM / IP Logged

If you are going to use the factory amp you will need to use the blue and white wire to the pink wire, however if you are going to use aftermarket h.u. amps and subs you have to by-pass(wire around the factory amp) in order for it to work. Good Luck.

There is no such thing as free installation!

Installer_mss

Copper - Posts: 221

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 14, 2005

Location: United States

Posted: April 19, 2007 at 8:33 PM / IP Logged

the amp is behind the glove box and easy to get to.

"If a man made it, another can modify it...it just takes some thinking."

"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."

tyma1026

Member - Posts: 9

Joined: July 22, 2003

Location: United States

Posted: April 29, 2007 at 4:19 PM / IP Logged

tcss wrote:

I'd like to use aftermarket everything; amps, subs, head unit and all. How do I go about bypassing the factory amp?? Question about the blue and white wire to the pink wire. Would I have to bypass everything if I do that or would connecting those wires keep the factory amp on so that I can hook everything up as in a normal install?? Thanks alot for your help it is much appreciated

tyma1026

Member - Posts: 9

Joined: July 22, 2003

Location: United States

Posted: April 29, 2007 at 4:22 PM / IP Logged

INSTALLER_MSS wrote:

the amp is behind the glove box and easy to get to.

Probably a stupid question but how do I get behind the glovebox? Is the amp right behind it or do I have to take more apart? Thanks again

smgreen20

Member - Posts: 36

Joined: October 11, 2006

Location: United States

Posted: April 29, 2007 at 9:05 PM / IP Logged

Open the glove box, on the right side of the glove boxes wall you'll see a rubber tab stopping it from opening any further. Just simply push it inward untill it clears. Goto ww.denalitrucks.com if you need any more in depth help w/your YD.

smgreen20

Member - Posts: 36

Joined: October 11, 2006

Location: United States

Posted: April 29, 2007 at 9:06 PM / IP Logged

sorry, it's www.denalitrucks.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 gmc yukon denali amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.