chrysler 300, double din kit?

Home / the12volt's Install Bay / Car Audio / chrysler 300, double din kit? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

djmajestik

Member - Posts: 2

Joined: January 08, 2007

Location: United States

Posted: April 24, 2007 at 6:54 PM / IP Logged

i got the 2006 chrysler 300 w/o nav

I wanna put in the avic-d3 and I cant find the proper double din dash kit since its a din and a half.. would anyone know what I can do?

Thanks

big-maim0ne

Member - Posts: 3

Joined: April 11, 2007

Location: United States

Posted: April 24, 2007 at 11:18 PM / IP Logged

yea i got the same deal wit my 300 (same head unit too actually) but as far as i know all you gotta do is get the replacement dash bezel from your dealer its like 95 bucks. its quite possiblely more complicated than that and im just a pet monkey if there is more too it i would certianly like to know.

If ignorance is bliss then im wized.

djmajestik

Member - Posts: 2

Joined: January 08, 2007

Location: United States

Posted: April 24, 2007 at 11:31 PM / IP Logged

thanks.. ill try dat out

05silver_c

Member - Posts: 2

Joined: April 25, 2007

Location: United States

Posted: April 25, 2007 at 8:46 AM / IP Logged

Just get some Fiberglass resin a dremel and some paint....

chrysler 300, double din kit? -- posted image.

05silver_c

Member - Posts: 2

Joined: April 25, 2007

Location: United States

Posted: April 25, 2007 at 8:52 AM / IP Logged

almost forgot... you can get the factory nav bezel and use an after market adapter, but in my opinion it just looks way better if you modify it

big-maim0ne

Member - Posts: 3

Joined: April 11, 2007

Location: United States

Posted: April 30, 2007 at 11:04 AM / IP Logged

so what did you dend up going with. was the factory nav bezel enough or did you need a brackett or anything fancy lilke that...

If ignorance is bliss then im wized.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 30, 2007 at 10:53 PM / IP Logged

I have used the standard dash kit to get my half moon pieces for each side and then trimmed the top and bottom of the bezel to make the deck fit. Its actually not that much of a strech to make it fit, and easy to do.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

chrysler 300, double din kit?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.