approximate cost, 2007 civic stereo

This is my first post, so hello all that read this and an early thank you to anyone that has a constructive response...

I am having the entire interior of my brand new 2007 Civic SI sedan removed, all the stock audio equipment removed, a bunch of sound deadening material installed, custom fiberglass in my door panels for 3 way component set, custom amp racks in the trunk as well as custom sub enclosures in the trunk.  The hope is (when all is said and done) to have the vehicle look as stock as possible (not doing any crazy suede inserts or anything like that) and as much trunkspace as possible (hoping to custom mold the sub enclosures along the sides of the trunk preserving as much space as possible).  I am looking to APPROXIMATE (I know no one can give me hard numbers) what the LABOR will cost me for the various pieces of this project.  So far the numbers I'm hearing are around $1000.00 for each door panel, and around $2000.00 for the interior (including dash) tearout, installation of the sound deadening, and reinstallation of the interior.  The amp rack and sub enclosures are still up in the air for labor costs.  Of course while the entire interior is ripped out, the wiring for the new system will be run, so there should be a MINOR savings there, but if anyone could ballpark this, I would appreciate it.  I just want to confirm I'm not getting ripped when they give me the final quote to do the work.

Thanks in advance for any help you can provide.

Omzig10

My thought, perhaps cynically pragmatic, when I read this is that your going to spend some $5000 to purposely cut that same amount of resale value from your own new car.

My interpretation there ozmig, is that you are ripping yourself off.

Well, it seems the12volt is host to many cynics...  To emphasize, I'm not really looking for how shortsighted it might be to spend closer to $10,000 on a brand new car.  That's not why I posted this thread.  I was just looking to hear what one of YOU might charge for a similar install.  I thought this was a forum for not only people doing installs themselves, but also vendors, shop owners, etc.  Again, any constructive comments are appreciated.

Thank you,

Todd O.

To be honest your asking something that is virtually impossible to do. To ballpark your job via the internet, I estimate 10k u.s. I'll take 60% up front. This price is dependent on how much input besides equipment choice you have.... In all seriuosness it will be exspensive to have it done right, talk to your friends/co-workers or anyone that has had expereince with the shops you are looking into, then go from there.