speakers making noise, converter

Home / the12volt's Install Bay / Car Audio / speakers making noise, converter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

datroboy510

Member - Posts: 6

Joined: May 26, 2007

Location: United States

Posted: May 27, 2007 at 1:00 PM / IP Logged

after i installed my output converter to the back speakers...everytime i turn it up and when the bass kicks, it makes a "CLICK" sound..only when the bass kicks..?????

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 27, 2007 at 3:22 PM / IP Logged

Sounds like you are over-driving your speakers. Either too much power or they need a high-pass filter. Or both.

Support the12volt.com

Back to Top

haemphyst

Platinum - Posts: 5,054

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: May 27, 2007 at 3:44 PM / IP Logged

If you do use a hi-pass filter (i.e. a "bass-blocker") be sure you install it AFTER the connection point where you tapped the wires for your LOC. If you tapped the LOC behind the deck, you're pretty safe, you can then put the bass-blockers anywhere in the line, but right at the speaker is generally best. I just wanted you to be aware of that.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 27, 2007 at 7:44 PM / IP Logged

Does your vehicle have a trunk? are your rear speakers mounted in the rear deck?

Back to Top

jmelton86

Gold - Posts: 1,228

Joined: February 07, 2007

Location: South Carolina, United States

Posted: May 28, 2007 at 7:04 PM / IP Logged

Wouldn't FMODS be better? This way the amp is only amplifying bass freq's, saving power. Right?

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=266-250

2013 Kia Rio -90a alternator

DDX470HD GTO14001 GTO1014D (x3)

Big3 in 1/0G

1/0G to GTO14001

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

speakers making noise, converter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.