amp will not power

Home / the12volt's Install Bay / Car Audio / amp will not power (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

feelthebeatnow

Member - Posts: 1

Joined: May 29, 2007

Location: United States

Posted: May 29, 2007 at 3:10 PM / IP Logged

The amp will not turn on in my car but did in a bench test. All the power readings came back good, the amp will not complete the power circuit when all wires are connected to the amp. HELLLLPPPP

Back to Top

Search for other posts by feelthebeatnow

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: May 29, 2007 at 3:38 PM / IP Logged

Get out your meter, check your ground, check your power from the battery, then check and make sure your have 12 volts from your remote turn on wire.

Back to Top

deemo

Member - Posts: 11

Joined: May 19, 2007

Location: South Africa

Posted: June 11, 2007 at 4:43 AM / IP Logged

check if the fuse is ok if yes recheck all wiring especially the remote on your headunit!!!!

deemo

Back to Top

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: June 11, 2007 at 3:48 PM / IP Logged

clean your battery terminals! might have corrosion.

"dont ground out!"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp will not power

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.