anyone know how to build a noise sniffer?

Home / the12volt's Install Bay / Car Audio / anyone know how to build a noise sniffer? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: July 08, 2007 at 6:51 PM / IP Logged

I know these are made and sold for detecting radiating noise, but i was wondering if anyone around the volt had any experience building one for had a link to share, so that i can have a fun project to play with on my down time.

rtfm

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: July 08, 2007 at 10:46 PM / IP Logged

hi,

find an old cassette walkman or similar. locate the tape head, remove it and extend the wiring (shielded cable) three feet or so. the tape head will be the transducer/sniffer. when play is pressed, noise, etc. picked up by the tape head will be heard through the headphones.\

hope this helps

mark

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

anyone know how to build a noise sniffer?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.