pac hi/low converter

Home / the12volt's Install Bay / Car Audio / pac hi/low converter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wassted

Member - Posts: 11

Joined: August 22, 2007

Location: United States

Posted: November 26, 2007 at 9:11 AM / IP Logged

I put one of these into my 07 Chevrolet Silverado, and I am using the remote wire that comes off of it to power on my amp. I believe this signal wire is causing my amp to turn on and off when I am not in the pickup and causing my battery to go dead. Anyone ever experience this?

Back to Top

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: November 26, 2007 at 11:35 AM / IP Logged

Yes I have had some TR-4s and Trunck-LOCs fail but usually they don't turn the amp on. Only remember one time the amp was left on. They're not that expensive, try another one.

There is no such thing as free installation!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pac hi/low converter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.