Fiberglass Pics, 2002 Nissan Sentra specV

Home / the12volt's Install Bay / Rides and Systems Gallery / Fiberglass Pics, 2002 Nissan Sentra specV (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

tcheck

Member - Posts: 8

Joined: June 23, 2003

Location: United States

Posted: March 30, 2005 at 12:19 AM / IP Logged

Here is my Glass job I did in my 2002 Nissan Sentra SER specV. It is not complete yet. There is allot more to do but I figure I would contribute also. There Are 4 10"s isobaric or facing each other in the trunk, 2 8"s molded in the front doors and MB Quarts in the kick panels and rear deck. Let me know what you all think so far.

Fiberglass Pics, 2002 Nissan Sentra specV -- posted image.

Tcheck

luvgoodball

Member - Posts: 10

Joined: March 21, 2005

Location: Canada

Posted: March 30, 2005 at 12:23 AM / IP Logged

that's crazy!!! hat's your first glassing job?? No way. If it is. GOT DAMNNN

Even though life must go on, we still mourn, while wishing y'all were home!!

tcheck

Member - Posts: 8

Joined: June 23, 2003

Location: United States

Posted: March 30, 2005 at 12:28 AM / IP Logged

No second one. I also did a mustang. I took out the back seat and molded 2 nitrous bottles on the sides and a amp in the center. I don't have any pics though I need to get some. But thanks

Tcheck

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: March 30, 2005 at 6:48 AM / IP Logged

looks great. crazy setup.

realitycheck

Silver - Posts: 751

Joined: September 09, 2004

Posted: March 30, 2005 at 7:50 AM / IP Logged

Hey man really nice job, I have to give you mad props on the detail work of the wiring and stuff. Awesome job buddy. How did you make all those amp racks and the cap rack?? Just mdf or did you use bondo in the corners???

Learning the trade one fiberglass creation at a time!

Drocay

Member - Posts: 21

Joined: May 28, 2004

Location: United States

Posted: March 30, 2005 at 9:01 AM / IP Logged

thats a serious install. u did great job how long did it take you.

tcheck

Member - Posts: 8

Joined: June 23, 2003

Location: United States

Posted: March 30, 2005 at 9:06 AM / IP Logged

I used MDF and Glassed the backside of the MDF so the seems do not crack through the paint, then bondo in the corners. The black vinyl is a thin peace of macenite with padding and then wrapped with the vinyl.

Tcheck

tcheck

Member - Posts: 8

Joined: June 23, 2003

Location: United States

Posted: March 30, 2005 at 9:17 AM / IP Logged

It took like 3 months for the whole install. Working here an there after work and on the weekends. Total hours like 250 even with some slight screw-ups that needed to be redone and painting. Now that I Learned allot faster ways of doing thing I could probably do it in half of that. The first time is learning the second is fun the third is routine. Thanks for the good feedback.

Tcheck

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: March 30, 2005 at 9:54 AM / IP Logged

You said it isn't finished yet, what else could you possibly do?

Also, are those ports?

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

tcheck

Member - Posts: 8

Joined: June 23, 2003

Location: United States

Posted: March 30, 2005 at 10:14 AM / IP Logged

There are grills that go on the 8s up front that I am currently making, and little peaces in the trunk to cover up peaces of the metal so it look complete. Yes those are flex ports.

Tcheck

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.