Making Turn Lights Running Lights

Home / the12volt's Install Bay / Motorcycle Electronics / Making Turn Lights Running Lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

charlestwaters

Member - Posts: 4

Joined: December 22, 2003

Posted: November 28, 2005 at 1:04 PM / IP Logged

Unusual question here...

Have a `96 Suzuki GSXR-750 that when the bike is running, the right and left ambers are strictly turn lights. Can anyone tell me if there is an easy way using relays to wire these lights so they are also running lights until you turn the blinker on, then they function like normal!?

Back to Top

Search for other posts by charlestwaters

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 28, 2005 at 1:48 PM / IP Logged

Well you could wire the power going to them to ign and use a relay to break the wire when the turn signal is used. So you would cut the wire going to the light and wire that to pin 85, pin 86 would be ground, 30 would be ign+, and 87A would be output to light. This is assuming that the light's power is what controls the blinking.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

charlestwaters

Member - Posts: 4

Joined: December 22, 2003

Posted: November 28, 2005 at 4:37 PM / IP Logged

auex wrote:

Well you could wire the power going to them to ign and use a relay to break the wire when the turn signal is used. So you would cut the wire going to the light and wire that to pin 85, pin 86 would be ground, 30 would be ign+, and 87A would be output to light. This is assuming that the light's power is what controls the blinking.

I will try that with one of the lights in the next couple days! I am assuming as well, since the wires are basically direct from the fuse block to the signals!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Making Turn Lights Running Lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.