Custom LED board

Home / the12volt's Install Bay / Motorcycle Electronics / Custom LED board (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jcayer

Member - Posts: 17

Joined: March 09, 2004

Location: United States

Posted: March 24, 2006 at 6:52 AM / IP Logged

Hello everyone, have a question and have searched to no avail.

I would like to create a custom taillight out of LED's (inside the stock housing) for a motorcycle. it would only need two functions, brake and parking. I have the wiring undercontrol, but its the actual creation that i have a question about...

I am picturing using a breadboard and a series of leds, but the part I am lost on, is how to connect the leds? is there a easy way to make a "circuit" on the back of the board, or do I really have to sit there and solder wires to each and every led bulb???

Thanks in advance!

firstrax

Copper - Posts: 113

Joined: January 18, 2006

Posted: March 24, 2006 at 9:38 AM / IP Logged

You can get a custom pcb made for about 30.00 delivered (single sided). I have done a couple hundred designs with these guys over the years. I use Altium for layout software but they have a free layout program you can download. This is the way to go if you want a really professional looking part. Plus if any of your friends want one you can just reorder the same design. Feel free to ask for help if you decide to go this route.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Custom LED board

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.