03 infiniti fx45, xk07

Home / the12volt's Install Bay / Car Security and Convenience / 03 infiniti fx45, xk07 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mobilefx

Copper - Posts: 48

Joined: November 05, 2003

Location: United States

Posted: December 15, 2007 at 3:03 PM / IP Logged

what are the can bus high and low wires on the 03 infinity fx45.. my xk07 list 04 infinity cars, but not that vehicle.. found the wires in the bcm location for most cars and when i tried those the tach was all screwy in the car..

no tech support on sat from trilogix or else they are backed up.

it has intelli key system

mobile f/x

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 15, 2007 at 5:59 PM / IP Logged

Hey, this might be your lucky day! Just this morning, I encountered the same issue with a 2003 G35. Trilogix lists the XK07, but then doesn't show you the correct diagram in the manual.

Anyway, the two vehicles should have the same BCM.

Top left of the BCM, brown plug. With the car's ignition off, unplug the plug, stretch it out, and remove the tape.

You'll see that the blue (high) and red (low) wires are twisted together, so those are your data.

The GREEN/ orange LED wire is in the same plug. But since you said your has the Intelligent Key, you shouldn't need to do LED interrupt.

Also, in that same plug, in the top row to the left of the clip, those two empty pins do your lock and unlock, if you add wires in there.

Back to Top

mobilefx

Copper - Posts: 48

Joined: November 05, 2003

Location: United States

Posted: December 15, 2007 at 7:14 PM / IP Logged

perfect....thanks man, only thing strange was that the car started alittle rough.. maybe low voltage.. retaught tach, same thing...started but wasnt super smooth, not hanging just spudder'd alittle

initially i was to use a idata module.. just ordered my first batch and happened to get them in.. they have a mod that was to do locks,and transponder in one. wired that and couldn't even get the locks to program..easy programming, must have overlooked something but couldn't get ahold of anyone to troubleshoot.... ripped it out and did the trilogix one. here is the weird thing.. the idata link says that the wires for the CAN h and CAN L are blue and yellow at the OBD. thats initally where i went cuz i was using their module. suprised that they wouldn't be the same wires. I tried to use the OBD wires for the xk07 CanH and CanL but notta.

red and blue worked fine. ...had them backwords (long day) and the tach in the car was acting odd.. FYI didnt need the security light wires either by the way.

mobile f/x

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 infiniti fx45, xk07

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.