2007 chevy silverado not classic

Battery     RED / WHITE (2A)          (+)     IGNITION SWITCH HARNESS           FOR HIGH CURRENT USE 2 THICK RED / BLACK WIRES AT FUSE BOX       Ignition 1     PINK          (+)     IGNITION SWITCH HARNESS      Ignition 2     WHITE          (+)     IGNITION SWITCH HARNESS      Accessory 1     BROWN          (+)     IGNITION SWITCH HARNESS      MUST LOSE VOLTAGE DURING CRANK FOR REMOTE START/ SEE OUR 2007 TAHOE REMOTE START TECHTIP       Accessory 2          FOR REMOTE START INTEGRATION      Starter 1     WHITE          (+)     IGNITION SWITCH HARNESS           REQUIRES POSITIVE THROUGH 1300 OHM RESISTER. SEE OUR 2007 TAHOE REMOTE START TECHTIP       Starter 2     PINK/BLACK     (+)     IGNITION SWITCH HARNESS                FOR REMOTE START INTEGRATION      Anti-Theft Type          PKIII      Anti-Theft Descript     TRANSPONDER      Key Sense     PINK     (+)     IGNITION SWITCH HARNESS                MUST USE THIS WIRE FOR REMOTE START       Tachometer     UNCOMMON WIRE     (AC)     ANY COIL      Speed Sense     D. GREEN / WHITE     (AC)     AT RADIO C4 ORANGE CONN PIN 5                     BLACK PLUG PIN #57      Parking Lights     LT.BLUE          (-)     SWITCH OR BCM CONN C2 PIN 21                MAY BE SEPARATE WIRES FOR LEFT AND RIGHT.      Low Crr. Pk Lights     DARK BLUE     (-)     BCM C5 PLUG PIN 24      Brake Lights     LIGHT BLUE/WHITE     (-)     BRAKE SWITCH                IGNITION MUST BE ON FOR THIS WIRE TO TEST      Reverse Lights     LIGHT GREEN     (+)     FUSE BLOCK UNDER HOOD C3 PLUG PIN E4      Horn          TAN     (-)     COLUMN HARNESS OR BCM C5 PLUG PIN 18                ALSO AT BCM MODULE UNDER DRIVER DASH There is a wire diagram for that remote starter interface. I can email you it in PDF opened in acrobat reader.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

please e-mail that diagram kyiracing@yahoo.com thanx

sentThe wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Chances are the PK3+ system is not being bypassed properly. Does it attempt to start and is the Passlock light in the dash on when it fails to start ?Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Still dealin with this damm truck this morning,can anybody e-mail me DirectWire tech doc 1605 remote start interface information,Were still setting up our account (new store) with dei not doing this to ces next week so i can't get on there right now.

What bypass module are you using to bypass the PK3+ system ?Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA