dome delay causing problems

Home / the12volt's Install Bay / Car Security and Convenience / dome delay causing problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jslayton

Member - Posts: 23

Joined: September 15, 2005

Location: United States

Posted: January 19, 2008 at 7:39 PM / IP Logged

The dome light delay on the 2004 trailblazer is causing problems. The alarm has some programming that is meant to account for the delay, but for some reason I can't get it to work. I'm using a cheap Inwell alarm and would like to just know of a wire I can use that is just hot when a door is open, not if it closed. Which wire can I use and where?

Back to Top

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: January 19, 2008 at 8:57 PM / IP Logged

GRAY/BLACK at the courtesy light under the dash or the light over the driver's side door to catch all doors and the rear hatch. The seperate doorpins are: GRAY/BLACK-driver's door (located in driver's door), BLACK/ WHITE-passenger door (located in passenger door), LT.BLUE/BLACK-left rear door, LT.GREEN/ BLACK-right rear door (both found at the fusebox under the rear seat on the driver's side. All wires are negative (-) polarity.

Just a tip.....try to keep all your posts on one thread...it makes it easier for people to help you.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome delay causing problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.