What diode do I use with hood pin autopag

Home / the12volt's Install Bay / Car Security and Convenience / What diode do I use with hood pin autopag (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bog1e

Member - Posts: 6

Joined: February 09, 2003

Location: United States

Posted: February 27, 2003 at 4:45 AM / IP Logged

Sup guys I just had a quick question for ya. In the autopage 750lcd installation manual it says to use a diode for the hood pin switch and also for the instant trigger wire. I just need to know what type of diode to use with this application. Thanx doodz! What diode do I use with hood pin autopag -- posted image.

What diode do I use with hood pin autopag -- posted image.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 27, 2003 at 5:27 AM / IP Logged

If it's only a grounding activation use a 1N4001 1 amp diode.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: February 27, 2003 at 5:28 AM / IP Logged

you can use a 1 or 2 amp diode. make sure you put the cathode side towards the hood switch.

Good luck,

david

bog1e

Member - Posts: 6

Joined: February 09, 2003

Location: United States

Posted: February 27, 2003 at 5:47 AM / IP Logged

Man you guys are fast yo. Thanx a lot, ohh and if you guys have any pointers for me, please let me know, since this will be my first install. Thanx.

jduncan_69

Member - Posts: 2

Joined: February 27, 2003

Location: United States

Posted: February 27, 2003 at 11:28 PM / IP Logged

Just to let ya know, all the autopages that I have done have a BLACK/ white wire on them that have to be grounded if not in use for the remote start to work.

Jason

bog1e

Member - Posts: 6

Joined: February 09, 2003

Location: United States

Posted: February 28, 2003 at 5:45 AM / IP Logged

Schweet I am pretty sure I know which wire your talking about.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

What diode do I use with hood pin autopag

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.