2008 ford escape

Home / the12volt's Install Bay / Car Security and Convenience / 2008 ford escape (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

russbm

Member - Posts: 46

Joined: December 17, 2007

Location: Kentucky, United States

Posted: February 13, 2008 at 6:23 PM / IP Logged

Hello

Need help in what to wire to a 12 ign hot for a Seat Heater, Driver and Passenger side has 15 amp fuse each, it call for a WHITE/ Red wire but it a thin wire. And the wire has to be so it only come on when the ign key turn to on.

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 13, 2008 at 7:00 PM / IP Logged

My suggestion would be to use a relay wired like:

Pin 30: To positive on battery with 30 amp fuse within 6" of battery post.

Pin 86: Ground

Pin 85: Positive ignition from ignition harness (DEI lists ignition as WHITE/ orange on the 08 Escape)

Pin 87: Out to accessories you are adding

Installer, IT support, and FFL. I need less hobbies.

Back to Top

russbm

Member - Posts: 46

Joined: December 17, 2007

Location: Kentucky, United States

Posted: February 14, 2008 at 9:00 PM / IP Logged

This is not a constant hot where seat heater be on with the key off is it. I want it where it will be off when key is turn off, so seat heater will not come on. cause some people will never remember to turn it off.

Back to Top

russbm

Member - Posts: 46

Joined: December 17, 2007

Location: Kentucky, United States

Posted: February 15, 2008 at 3:26 PM / IP Logged

I did add the relay like you show me it work ok. Thank you for your help.

Russell

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 ford escape

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.