07 durango start problem

Home / the12volt's Install Bay / Car Security and Convenience / 07 durango start problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

silent bob

Member - Posts: 16

Joined: January 11, 2007

Location: United States

Posted: February 22, 2008 at 7:24 AM / IP Logged

Installed an Audiovox 9056 start unit with ASXK532 bypass. After the factory alarm arms, the unit will fail to start unless I use the factory remote to lock or unlock and "wake up" the BCM first. Other than that, it works fine. Tried the Audiovox tech tip of using a relay to ground the violet/brown wire through an 8.5k resistor, but that didn't seem to make a difference. Any suggestions?

thanks,

the part came out once

therefore it must go back in

where is that hammer

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 22, 2008 at 7:51 PM / IP Logged

Did you not hook up the OEM alarm disarm wire to the door unlock wire ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: February 22, 2008 at 7:55 PM / IP Logged

First, are you sure its an 07? Whats the production date (available on the driver door jamb information plate). The only problem I have heard of utilizing the XK532 module is a single honk from the factory alarm during remote start. To fix that problem you can use the disarm pulse thru the 8.5k resistor to solve that. I would verify that all your wires are working properly. Does the Durango have an actual starter wire or is it fully bussed? If its fully bussed you will need to ground the pink wire thru a 1k resistor, or wire it thru a relay.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 durango start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.