random door trigger of hornet 564t

Home / the12volt's Install Bay / Car Security and Convenience / random door trigger of hornet 564t (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dirtrider031

Member - Posts: 16

Joined: January 11, 2008

Location: Canada

Posted: March 03, 2008 at 10:16 PM / IP Logged

Hey i have a 97 ranger i installed a remote start/alarm into and every once in a while the door trigger decides to go off and sound the alarm. I have no idea why it would be doing this? Anybody have any ideas?

Back to Top

dtk1

Copper - Posts: 179

Joined: June 21, 2007

Location: United States

Posted: March 03, 2008 at 11:35 PM / IP Logged

I had this issue a couple of time you need to diode isolate the door trigger of the car and the one going to the alarm the reason why this happen is because the BCM shots down after a couple of minutes n it sends a small current to see if any doors where left open is a small signal but is enough to trigger the alarm. chek this link https://www.the12volt.com/installbay/file.asp?ID=514

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

random door trigger of hornet 564t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.