05 accord driver unlock priority

I have a 05 Accord LX Sedan with the Clifford Matrix 50.5x. I also have the 530T window module installed because my installer said I needed it in order for my windows to roll up and down though the remote. The only thing I didn't like was that when i disarm the car, all 4 doors unlocks. How can I go to rewiring it so that when I press the unlock once, the drivers door unlocks, and all the door unlocks when pressed twice. If second unlock is wired correctly, will the comfort closure also work? Thanks in advance.

if you had a shop install it, i suggest you bring it back and ask them to do driver priority unlock. If you attempt to do it urself you void the warrenty of your install.

if you wish to do it yourself, grab a relay and relay harness.

Driver Master Unlock (REV) YELLOW /GREEN @ Light Green Plug at Fusebox

take the vipers driver unlock output and connect to the relay

85 - driver unlock from viper (-)

86 - constant 12v87 - constant 12v87a - YELLOW /GREEN wire cut ( switch side) 30 - YELLOW /GREEN wire cut (motor side)

i suggest you honestly bring it back and tell the installer you want driver priority unlock. this should be no biggie as the wires sit in the kick panel he might charge you labour for the lock setup and relay, but shouldnt cost much (30 or so)