viper 5900 and daytime running lights

Home / the12volt's Install Bay / Car Security and Convenience / viper 5900 and daytime running lights (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kissmyss

Member - Posts: 7

Joined: March 08, 2008

Location: New York, United States

Posted: March 09, 2008 at 4:48 PM / IP Logged

I have an 05 Impala and since the alarm install the DTR's don't come on anymore. Is this the way the 5900 works or did the installer disable/forget to connect something

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 09, 2008 at 5:29 PM / IP Logged

if you had it installed at a shop, bring it back and tell them to look at it. but the viper shouldnt do anything to the electrical system

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: March 09, 2008 at 6:54 PM / IP Logged

The alarm shouldn't make a difference, no.

Is there any chance the parking brake is on? If so, the DRLs stay off.

kissmyss

Member - Posts: 7

Joined: March 08, 2008

Location: New York, United States

Posted: March 09, 2008 at 8:06 PM / IP Logged

No, I don't use the parking brake.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 09, 2008 at 9:30 PM / IP Logged

wat car? is the healdight switched to auto? if so the DRLs might not come on at all. I noticed this on toyota camrys. if set in auto, drls dont work unless its placed in the off position.

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: March 10, 2008 at 3:13 PM / IP Logged

When installing they may have left something unplugged. Always make sure that when a car is given back to you to test all the functions that the vehicle already has. Just take it back, odds are that something was left unplugged when putting the car back together.

kissmyss

Member - Posts: 7

Joined: March 08, 2008

Location: New York, United States

Posted: March 11, 2008 at 7:24 PM / IP Logged

All is good, I didn't know the DRL's only come on when the car is in gear.

davesparkave

Member - Posts: 15

Joined: February 18, 2008

Location: Pennsylvania, United States

Posted: March 22, 2008 at 7:28 PM / IP Logged

they blew your lamp control module out of wack they didnt hook the parking light flash up right ,i almost can guarantee thats what happened i seen it happen to my car.go to junkyard get a lcm hook up the parking light flash to the main parking light wire on the lcm not to the headlight/park light switch thats where they went wrong .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5900 and daytime running lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.