the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 nbs sierra remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
skostur79 
Member - Posts: 19
Member spacespace
Joined: August 29, 2006
Posted: April 05, 2008 at 9:35 PM / IP Logged  

have o7 sierra  installing autopage rs900

and a pkugm2x for bypass

base truck no door modules  so power locks to bcm

ign 1 pink  , ign 2 white   acc brown  (relay -ground for start )

does that sound right? 

Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: April 06, 2008 at 7:12 AM / IP Logged  
skostur79 wrote:
(relay -ground for start)
What do you mean by this? There is no straight negative start wire in that truck.
This post has the wiring chart for the new body style GM trucks. There is no white IGN2 wire.
If you follow the PKUGM2X instructions and use the information listed in that post for the rest you should be fine.
Installer, IT support, and FFL. I need less hobbies.
skostur79 
Member - Posts: 19
Member spacespace
Joined: August 29, 2006
Posted: April 06, 2008 at 9:31 AM / IP Logged  

i was told the acc wire once it sees ground it enables the starter

by wiring a relay  to create a ground from a positve rs signal 

but yes thanks for the wiring     i found several ones all for nbs    ,

skostur79 
Member - Posts: 19
Member spacespace
Joined: August 29, 2006
Posted: April 06, 2008 at 8:17 PM / IP Logged  
all done  works great 
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: April 06, 2008 at 9:31 PM / IP Logged  
The acc doesn't see ground - it sees 12 volts go away during the crank position, which the remote start will do anyway. There's no need to connect it any differently from a car with a conventional ign. switch.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
skostur79 
Member - Posts: 19
Member spacespace
Joined: August 29, 2006
Posted: April 07, 2008 at 5:37 AM / IP Logged  

yes your right ,  i was told a relay might be need if the rs acc doesnt show 0 volts when cranking


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer