2004 dodge ram door trigger

hopefully someone out there can help me

i just replaced my Audiovox ap996a alarm with a Autopage 1000 system, but now i can get the door triggers to work. everything is hooked up correctly

Purple for the drivers door, PURPLE / orange left rear door.  purple /white right door and purple / YELLOW right rear door all with diodes with bands away from the alarm box.

all 4 door triggers are diode isolated and the negative trigger on the alarm(green wire) is used but when i arm the system about 45 sec. after i arm it the alarm goes off on the door trigger.  i thought about just using the domelight as the trigger but dont really want to do that if i dont have to.

thanks

i wonder why it worked the way i have it wired now with the Audiovox system. Do you have any diagrams for installing the 8 diodes?

You don't need a diagram. Leave the ones you have already installed. Put 4 more on 1 ea. the individual door pin wires. With the line away from the BCM Reconnect your trigger wires with the diodes installed past/away from the diodes inline on the factory wires.

Heres a diagram that shows cutting the door pin wire. You can do it this way or simply put the diode in line, just note the psotion of the alarms wire.