astroflex serie 120 programming

Home / the12volt's Install Bay / Car Security and Convenience / astroflex serie 120 programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rebes

Member - Posts: 2

Joined: May 05, 2008

Location: Saskatchewan, Canada

Posted: May 05, 2008 at 8:39 PM / IP Logged

Hi everyone,

My girlfriend's car's battery died over the winter, and it seems the security module in it has reset itself... The key fobs still work, but one issue she has with it is that instead of beeping when she unlocks the door, it actually makes a noise like the alarm is going off for about 1 second, and then stops. It's pretty irritating, so I would like to reprogram that "feature" out of it if possible.

The module is the Astroflex Serie 120 with (I believe) 8 dip switches on the side of it. I didn't see any other damage to the wires or module, and it's working perfectly otherwise.

Can anyone hook us up with instructions to reprogram the unlock/lock beep, or with the installer manual for this old system?

Thanks!

Rebes

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: May 06, 2008 at 9:31 AM / IP Logged

It's here.

See page two for programming.

Prepare your future. It wasn't the lack of stones that killed the stone age.

rebes

Member - Posts: 2

Joined: May 05, 2008

Location: Saskatchewan, Canada

Posted: May 06, 2008 at 9:47 AM / IP Logged

Hi Big Dog,

I was referred to this short installation guide last night by another member, however it seems to be missing some information for programming... This guide doesn't have anything to change the sound when the door is locked/unlocked, or to disable the sound...

If you look at step 14 on page 1, it says "Consult Installation Manual (193-126-121) for information on other methods"... I'm wondering where I might find this installation manual?

Or if you have specific information about the code required to change just that feature, that would be fine too!

Thanks,

Rebes

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

astroflex serie 120 programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.