window module, 06 tundra

I have done a bit of research and conclusion is that in order to make 530t work in an 06 double cab tundra i hace to increase the current going through the module. other wise the windows will stutter when using the truck window contols.

I have an autopage1000 and really want to make window work properly too

thanks

mk

Ok i now this topic gets beat up a little I have a 06 double cab tundra an autopage1000

I bought some dei 530t's hoping to just use those for my windows.

So the driver window came with one touch down and seems to be the only window that works. when 530 is installed on the other windows it makes them stutter when i use door switches. I have been told this is a current (amperage) issue, also that it is common in this truck and scion.

Do i fix this with a relay or should i build a relay module instead?

ideas?

Are we askign our quwestion wron or is it that noone has figured it out?

https://www.the12volt.com/installbay/forum_posts.asp?tid=104540&KW=window+module

https://www.the12volt.com/installbay/forum_posts.asp?tid=102491&KW=window+module

Two different trucks same problem.....

So I can get my modules to work 530t, 529t, ac78, and auto loc module

results are

530t after cutting out resisters still not enough current to get windows to come down without pulsing LIke the want keep venting so you have to push buttons continuously down. up is fine. Would adding a relay help fix this and if so where?

529 works fine but does not vent or add one touch to the system.

ac78 same as 530

auto loc one touch fine works perfect. is not a vent module though. can i pulse regulate this?

Thanks