clifford g4/g5 5 button remote

Hi People, I have a UK Clifford Concept 300, also running Cliffnet Wizard Ver2.20 Pro. The remotes that came with the alarm are the standard G4 4 Button remotes. I have need to replace the alarm fob and have the new G5 5 Button remotes. Using the Wizard I select the 2nd pic in (shows 4 button) and then NEW and use the default program. However once uploaded to the brain and I go to use the remote it does not function, only one button does and thats the * and it puts it in Valet Mode. Batteries are fine, and have tried wiping the remotes and reprogramming and still the same. I note there is not picture of the 5 Button remote on the "Remote Program" Page. Anyone any idea how to sort this one out please ??? Thanks Graeme

Do it manually, then no probems, owner programming, plain x 1, star x 1 press padlock, wait for beep, press again, I have a 300 with I/start, I/voice window close, headlights boot (trunk) release etc etc with G5 remotes. The Wiz programmes arfe well glitched and I prefer to manually programme.