clifford g4 remote problem

Home / the12volt's Install Bay / Car Security and Convenience / clifford g4 remote problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

louisjames

Member - Posts: 3

Joined: September 30, 2007

Location: United Kingdom

Posted: July 13, 2008 at 10:22 PM / IP Logged

hello there, searched hi and low for a fix but cant find one, ok i have a concept 600 in my car, i only had the 4 button carbon remote which works fine, i purchased a 5 button (one on the side) master remote and am trying to add it. the problem is with the remote, after putting in new battery ,which ever button i press the light on the fob just flashes, where as it should stay lit whilst holding any button. if i hold side button then another it flashes faster, i had this once before with another master and just randomly pressed them all and it started working correctly. problem is whilst its like this the alarm cant see it when in adding mode. does any one know what i can do or is there a sequence i need to do with the remote?? this is really frustrating, any help GLADLY appriciated. thanks

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: July 14, 2008 at 12:56 PM / IP Logged

The light is NOT supposed to stay solid while you hold down a button. It is supposed to flash.

When you hit the shift key, and than one of the 4 face buttons, the light now flashes twice as fast, indicating that you are now up one level on channels 5-8.

When you hit the shift key TWICE, and then one of the 4 face buttons, the light now flashes 3 times as fast, indicating that you are now up two levels on channels 9-12.

When you hit the shift key 3 times, and then one of the face buttons, the light now flashes 4 times as fast, indicating that you are now up 3 levels on channels 13-16.

If you cannot reach the last level, then you have purchased a G3 remote and you need a G4 remote. Check the ID number to see if this is the case.

louisjames

Member - Posts: 3

Joined: September 30, 2007

Location: United Kingdom

Posted: July 14, 2008 at 1:17 PM / IP Logged

OmarR wrote:

The light is NOT supposed to stay solid while you hold down a button. It is supposed to flash.

When you hit the shift key, and than one of the 4 face buttons, the light now flashes twice as fast, indicating that you are now up one level on channels 5-8.

When you hit the shift key TWICE, and then one of the 4 face buttons, the light now flashes 3 times as fast, indicating that you are now up two levels on channels 9-12.

When you hit the shift key 3 times, and then one of the face buttons, the light now flashes 4 times as fast, indicating that you are now up 3 levels on channels 13-16.

If you cannot reach the last level, then you have purchased a G3 remote and you need a G4 remote. Check the ID number to see if this is the case.

oh cool, ok the number on back is 64-376 and above says mpt1340 licence exmpt, does that mean anything to you?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 14, 2008 at 2:30 PM / IP Logged

Yes it's a UK spec remote from a G2 or 3 and IS NOT compatible with a G4 alarm. That apart Omar is correct.

louisjames

Member - Posts: 3

Joined: September 30, 2007

Location: United Kingdom

Posted: July 14, 2008 at 2:32 PM / IP Logged

howie ll wrote:

Yes it's a UK spec remote from a G2 or 3 and IS NOT compatible with a G4 alarm. That apart Omar is correct.

ok mate, thanks for the info. very helpfull.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford g4 remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.