the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 dodge ram magnum turn signal wires


Post ReplyPost New Topic
< Prev Topic Next Topic >
dodge_30 
Member - Posts: 3
Member spacespace
Joined: October 19, 2008
Location: Ontario, Canada
Posted: October 19, 2008 at 1:06 PM / IP Logged  
Hi,
I'm installing mirror turn signals on my 2003 Dodge ram 1500 quad cab magnum and need to know the color of the turn signal wires I have not been able to find it on the internet yet so was wondering if anyone could help me out. Need the colors for Left and Right turn signal indicators and the location if they under driver kickpanel or where abouts.
Thanks,
Justin
Dodge Man
i am an idiot 
Platinum - Posts: 13,671
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 19, 2008 at 1:23 PM / IP Logged  

How many wires are there that connect to the blinker bulb on the front of the vehicle?   Do you have access to a Volt Meter?

dodge_30 
Member - Posts: 3
Member spacespace
Joined: October 19, 2008
Location: Ontario, Canada
Posted: October 23, 2008 at 12:33 PM / IP Logged  
Hard to see in there but I believe I see 2 wires running to the front blinker. One appears to be GREEN/ orange and the other BLACK/ blue but not sure on the second one. And yea I do have a volt meter. Sorry for the delay on the response I've been busy.
Thanks
Dodge Man
i am an idiot 
Platinum - Posts: 13,671
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 23, 2008 at 6:02 PM / IP Logged  

Turn the blinker on, and using your meter, probe the 2 wires untill you find the one that has 12 volts on it when the light is flashing.

dodge_30 
Member - Posts: 3
Member spacespace
Joined: October 19, 2008
Location: Ontario, Canada
Posted: October 23, 2008 at 8:53 PM / IP Logged  
Ok thanks will try that in the morning. Do you know how to remove the whole head light it would make it a lot easier for me to get at the blinker wires if I could remove it while wiring.
Thanks again,
Justin
Dodge Man

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer