92 landcruiser remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / 92 landcruiser remote start problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

desh187

Copper - Posts: 310

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 13, 2002

Location: Canada

Posted: November 05, 2008 at 9:32 PM / IP Logged

Iam installing a compustar 2wfm8000 with a cm3000 control module in a 1992 Toyota landcruiser Diesel.(alarm/autostart)

Tried to use glow plug wire but ignition turns on and remains on (does not crank)

Used alternator sensing but starter keeps grinding

Cannot locate a tach wire as it is Diesel and plug is blank where tach should be at diagnostic plug.

Any info would be helpful at this time

Thanks

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: November 05, 2008 at 10:07 PM / IP Logged

is the injection system mechanical or elecronic

if its electronic use a injector

if not cam or crank sensor

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

92 landcruiser remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.