xk05 ground when running output

Home / the12volt's Install Bay / Car Security and Convenience / xk05 ground when running output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mike10_07

Member - Posts: 11

Joined: October 24, 2008

Location: California, United States

Posted: November 29, 2008 at 7:16 PM / IP Logged

I am installing XK05 for my 2007 highlander but my car can start running only a few seconds then stop. I dont know if I get a wrong wires for XK05 or I should need to use a relay to connect (-)Status Output of 562t to Ground When Running of XK05 ?

anyone let me know ...thanks

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 29, 2008 at 7:23 PM / IP Logged

No relay, just connect them together. Running a few seconds then stop could be a tach issue....

Mike M2

Tech Manager

CS Dealer Services

mike10_07

Member - Posts: 11

Joined: October 24, 2008

Location: California, United States

Posted: November 29, 2008 at 11:17 PM / IP Logged

with a key in the ignition my car can start good. It is problem when I install the transponder XK05 which is no key require.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 30, 2008 at 8:34 AM / IP Logged

I gotta say i have never seen a more problematic bypass than the XK05. Every day here a few installers complain about the issues that unit has, not to mention the pain in the arse it is to install. We don't use them for these reasons, Idatalink makes one for that truck that is simple to install. Hopefully someone here can assist you further on getting it to work as i just don't know the units well enough(thankfully)...

Mike M2

Tech Manager

CS Dealer Services

mike10_07

Member - Posts: 11

Joined: October 24, 2008

Location: California, United States

Posted: November 30, 2008 at 11:10 AM / IP Logged

thanks

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: November 30, 2008 at 11:58 AM / IP Logged

"I gotta say i have never seen a more problematic bypass than the XK05".

I would agree

I would also use a keyoverrideall

It sounds like the bypass is not getting programed

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: November 30, 2008 at 12:03 PM / IP Logged

1 other thing we had one of these trucks that we couldnt get the signal for the key to put out.

A friend @ the dealership said the truck can only have 4 keys.

So that the computer will not program a new key after 4

If the truck is used you never know how many keys are out there.

Any1 ever hear this????????

dtk1

Copper - Posts: 179

Joined: June 21, 2007

Location: United States

Posted: November 30, 2008 at 3:32 PM / IP Logged

check you wires. switch the IMI wires I agree with all the people XK05 for toyotas are too complicated but now that you have it ill try to help you out. the reason why this could be is IMI backward or IMO is not right one chek that and let us know I have used at least 100 or more XK05 and they suck!

mike10_07

Member - Posts: 11

Joined: October 24, 2008

Location: California, United States

Posted: December 01, 2008 at 12:24 AM / IP Logged

I am trying to switch the IMI wires but it cannot start at all. Since the wire colors does not match with the installation guide therefore I swapped IMI and IMO to pin 26 and 27 at the BCM, the car still cannot start. The only 2 pin 15 and 16 can make the car start but just for a few seconds.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

xk05 ground when running output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.