clifford 3.3x remote start scion xb

I'm having some problems w/ the remote start system in my xB It is not attempting at all to start the car. I get an error signal on the remote, then hear the relays clicking. I have hooked up the remote start wires the same as in this post [url[https://www.the12volt.com/installbay/forum_posts.asp~TID~108499~PN~6[/url] except my car does not have the 2 green wires running to the ignition. I think this was part of the stock security, which I do not have. and I'm not even getting to the point where it will turn over. I have also: hooked up and tested the tach, grounded the neutral safety (AT), tested the brake, tested hood pin, plugged in the safety switch and have it in the 'on' position The only other wires I have hooked up are the 12+ constant, ground, siren, door, lock/unlock, antenna, and parking lights on the main harness. Everything else is working perfectly. Locks, unlocks, door triggers alarm, etc. I have a feeling like I am just missing something simple. Should any other wires be hooked up?   sorry this is only like my 3rd install, and the 1st in a really long time. I have tried it also w/ the key in the ignition, in the ACC, and ON position w/ the same results. Thanks in advance!

sorry, typo on the link https://www.the12volt.com/installbay/forum_posts.asp~TID~108499~PN~6

You don't mention what year XB? All of them have 2 ignitions that need to be connected, are they? New XB's have 2 starter wires, are they connected?Mike M2

Tech Manager

CS Dealer Services

sorry 06' xB, 1st gen. Hooked up both ignitions as such: pink to black, pink/white to BLACK / YELLOW.

i'll have to check later. is there a link or something to guidance on that? I honestly don't remember them flashing at all. I'm not near my car now, so I'll have to check later on.

Thanks! I'll have to check that. Anything for me to check out would be helpful at this point.

dang I am so stupid. I should read the manual. That was exactly the problem. Set it to automatic, and it works perfectly. I just noticed my parking lights aren't flashing, but hopefully that's just something simple

yea, don't bother with the parking light thing, just didn't put the jumper in yet. everything seems to be working perfectly. Just need to tidy up, Thanks again!