alarm/starter on 08 tiburon

hey I'm about to venture into this on an 08 tiburon and the only site I can find info from is staub. even directechs new updated site has no info, so wondering if anybody has any other info to cofirm with? of course I'll be testing every wire I hook up, but it'd be nice if somebody else had a source to confirm with. the car is standard as well

hey guys. running into snags. firstly my setup goes into reservation perfectly every time, tach has been learned, and my bypass is in and everything appears to work correctly. except the car will not crank. there's voltage on the crank wire and everything. even with a key in the ignition there is no crank. what could be wrong? I found that the crank wire coming off the key cyliinder is pink instead of white, but the crank wire is always gonna be at the key cylinder isn't it? unless it's multiplexed of course, but it doesn't make sense for that to be the case if all the other key positions have dedicated wires. any ideas? I'm pretty much stuck.

so you know I'm using a dei 556uw bypass

what kind of remote starter are you using and if the starter doesn't have a manual option, are you using the 689 manual module from directed?

it should be at the ignition cylinder. did you even test the wires? or just read what the diagram said and connected away.

yeah I tested but at the time I couldn't think of anything else but maybe I got the wrong wire. anyways thanks for the suggestions but I feel stupid I just hooked up the clutch wrong. it's a positive clutch and I fed it a negative. I pretty much have it. thanks to all