astrostart 2205 / 4204

Hi,

I bought a lightly used 2008 MDX which had an Astroflex remote starter fully installed.  When I bought it, the dealer said they have to disable the remote start since it is Acura Certified.  They also would not give me a remote for the unit.  It is now 0 F, and I want to get the starter working.  The dealer I bought the vehicle from is 500 miles away, and there is no local Astroflex / Astrostart dealer.  I'm handly and used to wire car stereos / had done some alarm installingmmanynyears ago,

The starter has a separate honda / acura immobilizer disable module.  The unit is still fully wired and has wires going to steering column, fuse panel, one to fuel injector, and one under hood (I assume it was for hood pin switch).

Does anyone have an installation manual for Astrostart 4204? I just have the user manual.  I would like the dip switch settings too.  I found the Acura wiring diagrams on this site so I should be covered there.

I hope to buy a used remote and program it to my existing system.

Thanks!

If anyone has the install manual / dip switch map for the astrostart, please feel free to email me.

My email addy is c3uo(at) hotmail dot com.

Thanks!