remote start starts on second try

Home / the12volt's Install Bay / Car Security and Convenience / remote start starts on second try (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

luigirox2

Member - Posts: 8

Joined: January 01, 2009

Location: Illinois, United States

Posted: January 02, 2009 at 4:40 PM / IP Logged

Ok I have an 07 wrangler I finaly got it to work but it it seems to start on the second try start fine with the key

Hornet 570t

I tried the tach method and it doesn't start at all

Any hl would be great thanks

thanks

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: January 02, 2009 at 4:42 PM / IP Logged

where did you try to get tach signal from? did you test it?

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: January 02, 2009 at 4:49 PM / IP Logged

i would use the tach method for sure, but you need to be sure you have the correct wire and the unit programmed for it to work.

luigirox2

Member - Posts: 8

Joined: January 01, 2009

Location: Illinois, United States

Posted: January 02, 2009 at 5:26 PM / IP Logged

Well the first the engine start but quickly dies then the secondtry theengine start and stays running

thanks

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: January 02, 2009 at 5:38 PM / IP Logged

is that with tach or voltage sensing? have you tried to increase the cranking time if you are using voltage sensing?

luigirox2

Member - Posts: 8

Joined: January 01, 2009

Location: Illinois, United States

Posted: January 02, 2009 at 5:50 PM / IP Logged

It with the voltage setting not sure how to increase the cranking time its a hornet 570T

Thanks for the help

thanks

luigirox2

Member - Posts: 8

Joined: January 01, 2009

Location: Illinois, United States

Posted: January 02, 2009 at 6:24 PM / IP Logged

still no luck any other sugestions

thanks

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: January 02, 2009 at 7:54 PM / IP Logged

my only suggestion now would be to find the correct tach wire and use tach monitoring.

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: January 02, 2009 at 8:21 PM / IP Logged

its the tach

the engine gets a lil build on the 1st try then its easy for it to start on the 2nd

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start starts on second try

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.