yukon rear hatch help

Home / the12volt's Install Bay / Car Security and Convenience / yukon rear hatch help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bsambrano

Member - Posts: 11

Joined: February 07, 2003

Location: United States

Posted: March 17, 2003 at 7:18 PM / IP Logged

I am nearly finished with my install of my 790xv in my 99 yukon four door tailgate style. I was wondering if the wire that goes to the trnk hatch release is driving a relay or a motor ? I only have (-) trigered outputs left so if its a positive trigger can i use a 451m to make this work.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 17, 2003 at 10:08 PM / IP Logged

Trunk Release BLACK (+) CONVENIENCE CENTER MODULE OR RKE *

* Convenience Center Located Under Driver Dash: RKE Located Right Of Steering Column, On Steering column Support Bracket

im not sure what a 451m is.

if you have a neg. output, then you can wire it up like this:

pin 86 and 87 fused 12v

pin 85 neg output from alarm

pin 30 positive output to trunk release wire.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

yukon rear hatch help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.