2004 ford focus dome light trigger

Home / the12volt's Install Bay / Car Security and Convenience / 2004 ford focus dome light trigger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Sungura222

Member - Posts: 47

Joined: August 20, 2004

Location: United Kingdom

Posted: January 19, 2009 at 4:13 PM / IP Logged

Hi to all,

Im installing a clifford intelliguard 850 to a 2004 Ford Focus. I've been told that connecting the alarm's dome light supervison output wire (H1/15 BLACK/ WHITE) to the car's domelight circuit trigger wire, will cause the alarm to trip when its armed. Is this correct ? I thought that setting the 'delay domelight' to ON in the installer selectable features sorts this problem? So do I just leave this connection, or do I need to connect this supervision output to one of the door trigger wires?

Any guidance appreciated

Thanks

(;-)

Back to Top

james bond 007

Copper - Posts: 62

Joined: January 18, 2009

Location: Ontario, Canada

Posted: January 19, 2009 at 4:47 PM / IP Logged

I would hook it up to the door trigger wire, you should also diode isolate it, worst case the alarm will go off when you test it after your done

Back to Top

Search for other posts by james bond 007

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: January 19, 2009 at 6:00 PM / IP Logged

the dome supervision wire is only supposed to have an output upon disarming anyway. so how can it set off the alarm? being that it was just disarmed before the dome supervision came on in the first place.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 ford focus dome light trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.