2006 tribute alarm/rs finished

Just finished up tonight.. Wanted to say thanks to those who had input on the install.. Everything seemed to work out ok.. Couple of comments. I'm a DIY so go easy. Theres got to be a better way to tie up all the harness/relays.. It just seems like once you tape the damn thing up its too stiff to move around? I was thinking to cut the harness down quite a bit and run your own wire/cable from each wire to a central location, then wire everything up at the end? Thoughts? The DEI 1100F is a nice piece, No issues. works first time.. A+A+A+ I couldn't get the dome supervision to work.. for some reason, the dome light ALWAYS stayed on.. I am using the same negative trigger from the doors that also trips the dome, its the pink wire and it switches ground.. Maybe something is wrong with my dome supervision output on my alarm brain. Everything was fairly straight forward.. Creating the relays for the singlewire door system was easy using provided diagrams found on this site. -Rog

OH, wanted to say that the wiring charts on here show pink as dome positive, but its not, I tested it and its a negative trigger.