2000 jimmy clifford 50.7x rs problem

Hello, I'm having a problem the remote start on this car. I'm using a clifford 50.7x with remote start with a 556lw passlock module. the car will not engage rs. When i push the button the key fab just reads "remote start error". There is no clicking or any type of engaging coming from the alarm unit. I have the wires set up as follows... Pink wire (from the alarm) to the pink wire in the car & white wire in car All 12v constants are hooked up to the 12v constant in the car The alarm has a good ground with no paint. Violet wire to yellow wire back too starter Green wire to yellow wire back to ignition switch Orange wire to orange wire (accessories) Brown wire in car is untouched pink & white and pink and black have been left disconnected on the rs side because they are used as ign2 relays,and manual doesn't call for it for this particular application. I have to white and blue status wire hooked up to the blue wire on the passlock control module. red wire on pl to 12v pink on pl to ignition wire black on pl to ORANGE / black on tumbler yellow on pl to yellow towards keyside BLACK / YELLOW on pl to yellow towards bcm Any help guys? i could really use it.