2000 f250, viper 5601

Home / the12volt's Install Bay / Car Security and Convenience / 2000 f250, viper 5601 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sesh1975

Member - Posts: 10

Joined: November 01, 2006

Posted: February 14, 2009 at 12:22 AM / IP Logged

I just recieved the 5601 from my online retailer and Im looking for a bit of installation help. According to the installation manual the remote start is set for manual transmittion. How do I reset it for automatic? Does anyone have a wiring diagram for this truck that might include pictures of were the wires are located?

Thank you

Shawn

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: February 15, 2009 at 6:58 PM / IP Logged

read the manual and search the forum its easy

sesh1975

Member - Posts: 10

Joined: November 01, 2006

Posted: February 19, 2009 at 1:49 PM / IP Logged

I did just that after posting here and never did check back until just now. I got it installed in just a few hours. Everything works very well. Thanks for your reply though.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 f250, viper 5601

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.