avantguard 5 and cliffnet wizard

Home / the12volt's Install Bay / Car Security and Convenience / avantguard 5 and cliffnet wizard (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 18, 2009 at 12:25 AM / IP Logged

Anybody out there experienced in playing with the cliffnet wizard. This thing is confusing. Im trying to make the second window control module for the rear windows work properly. I've got both connected and programed, but for some reason they don't work the same.

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: February 18, 2009 at 2:11 AM / IP Logged

what are they doing?

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 18, 2009 at 4:02 PM / IP Logged

I programed the rear module the same as the fronts. The program takes for both on the cliffnet. the only thing that will work on the rears is the remote down when armed. The fronts will vent and roll up and down, not the back.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 18, 2009 at 7:56 PM / IP Logged

What modules are you using?

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 19, 2009 at 11:53 AM / IP Logged

running 2 dei 530t modules.

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 19, 2009 at 11:56 AM / IP Logged

It worked for a week and then it stopped working except for the full down. the fronts still work. I''ve even replaced the module. Still the same. fronts work. rears don't.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 19, 2009 at 1:53 PM / IP Logged

Forget Wiz programming. All you had to do was connect your orange and a spare aux from the AG 5 and follow their instructions. It has absolutely nothing to do with the alarm's programming. I've had 2 x 530ts in my car for about 5 months with no problems.

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 19, 2009 at 6:07 PM / IP Logged

I'll check the wiring. I did it a year ago. I don't remember what I did. Good to know that it's not the programing.

fnkytrd

Member - Posts: 21

Joined: December 04, 2008

Location: Washington, United States

Posted: February 20, 2009 at 5:10 PM / IP Logged

looks like my buddy told me that Im using two smart window modules for this alarm. I found the box and assumed it wasnt the smartwindow modules.

Oh well, can anyone help shed light to this stupid programing. I can only remote down the rear windows. I cannot vent or close windows when arming. The front windows work perfectly.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 20, 2009 at 5:26 PM / IP Logged

2 Options, try doing one at a time whilst disconnecting the other, try substituting a 530t for one of them.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.