alarm help

Home / the12volt's Install Bay / Car Security and Convenience / alarm help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

robHI

Member - Posts: 35

Joined: August 22, 2002

Location: United States

Posted: March 20, 2003 at 11:13 AM / IP Logged

i got a clifford ace 4000 alarm and a 98 toyota avalon. i have a problem with the alarm. my parking light does not blink. another is when i am driving, alarm arms itself led start blinking etc. another is when i disable it to get into my car, not even opening the doors yet, the indicator is on for the doors. can anyone help.

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: March 20, 2003 at 7:38 PM / IP Logged

Sounds like a install problem . wrong wires tapped .

Joe O'Byrne

Owner / Installer

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 21, 2003 at 2:46 PM / IP Logged

check your ign. wire (12v switched) you should have a wire that requires 12v when the key is on. sounds like you dont have that wire hooked up. also check the light flash output.should be a fused wire.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.