the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

aps 997a, 97 blazer


Post ReplyPost New Topic
< Prev Topic Next Topic >
two1nine 
Member - Posts: 3
Member spacespace
Joined: January 27, 2009
Location: Indiana, United States
Posted: February 20, 2009 at 10:49 PM / IP Logged  
hows it going im currently installing a APS-997A on a 1997 Chevy blazer and i pretty much have everything hooked up except the outputs..and im looking for guidance....see pic below
aps 997a, 97 blazer -- posted image.
My 97 Blazers Wiring
*1: this is the alternate ignition harness....is this still needed to run with the 97 blazer? and if so where would i hook it up?
*2: these are the outputs im not sure where these would go....and if id need the diesel wait to start?
*3: then this is the channel outs which im also unsure of there correct connections
thanks
-Two1nine
flobee4 
Silver - Posts: 585
Silver spacespace
Joined: January 02, 2004
Location: United States
Posted: February 20, 2009 at 11:42 PM / IP Logged  

Hello,

1) You will not need this harness for your blazer

2) These are extra outputs to control aux. devices such as a window control module, sunroof closure, or whatever else your mind can come up with...

3) same as number 2, but I believe output 3 is for your trunk release.  But that output is negative and your trunk release on the blazer is Positive. You will need to use a relay to change that negative to a positive. I believe thats in the manual. if not, its in the relay section to the left on this site.

Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: February 21, 2009 at 7:28 AM / IP Logged  
I agree with flobee4, but I'll add a little more:
1. Not needed.
ORANGE / black only if your car has a turbo engine, and even then, it's still optional.
If you prefer your installation to power up ALL of your car's ignition and accessory circuits, you could:
Connect the RED / black to constant power. Connect the pink to the car's brown heavy-gauge accessory wire in the steering column.
Go into the programming menu and for the Ignition 3 output, select "as accessory."
However, I've never powered up the brown second-accessory wire in a Blazer, and I've never had problems.
2. What he said.
The wait-to-start wire should be hooked up to nothing.
Those other two outputs, you could use for whatever you want.
3. If you'd like, you can open your rear hatch glass, using the relay as mentioned.
The blue Channel 3 output makes a pulse if you hold down the remote start button for four seconds. Four seconds is a long time, and you'll hate it....don't use the blue wire.
The GREEN/ black Channel 3 makes an output when you hit the Option button. That's the best one to use for the rear hatch.
P.S.
From the factory, the remote is configured like this:
Channel 3 blue: Push and hold remote start button.
Channel 4 GREEN/ black: Push Option button.
Channels 5, 6, and 7 are NOT programmed to the remote. You'd have to re-program the remotes yourself, using any combination of buttons you want to activate these features.
two1nine 
Member - Posts: 3
Member spacespace
Joined: January 27, 2009
Location: Indiana, United States
Posted: February 21, 2009 at 8:55 AM / IP Logged  
thank you both.....i love this place
two1nine 
Member - Posts: 3
Member spacespace
Joined: January 27, 2009
Location: Indiana, United States
Posted: March 07, 2009 at 9:23 AM / IP Logged  
i have one more question where is the best place to hook up the the red powers

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer