98 ford ranger, audiovox 997

Home / the12volt's Install Bay / Car Security and Convenience / 98 ford ranger, audiovox 997 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cky022

Member - Posts: 3

Joined: February 20, 2009

Location: Indiana, United States

Posted: February 20, 2009 at 8:35 PM / IP Logged

hey i have an audiovox 997 and i was wouner when i instal the remote staet do i have to use the starter kil relay to get the remote start to work? and if so how do i hook it up thanks and its a stock ranger with no power windows or locks or factory arlam.

JBuxton

i am an idiot

Platinum - Posts: 13,673

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 20, 2009 at 8:57 PM / IP Logged

No you do not need to install the starter kill relay to get the remote start to work.

cky022

Member - Posts: 3

Joined: February 20, 2009

Location: Indiana, United States

Posted: February 21, 2009 at 12:05 AM / IP Logged

ok but my remote start dont work? i cant seemt o get the tach wire to wrok so i cant program the cimputer for the tach speed and this is why i think its not working i have it hooked up to the tan/white wireer coming over the 4 wire pulg for the coil pack is this right?

JBuxton

i am an idiot

Platinum - Posts: 13,673

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 21, 2009 at 3:06 AM / IP Logged

We need a little better definition of "But my remote start don't work" Yes the wire is tan/white at the coil.

cky022

Member - Posts: 3

Joined: February 20, 2009

Location: Indiana, United States

Posted: March 02, 2009 at 3:26 AM / IP Logged

so i just installed my audiovox 997 and everything works the remote start and everything. the only problem i have is when i remote start it the blower motor for the heater wont turn on till i get it in and put the key in and turn it to the on position and it makes me really confusied and i have a 98 ford ranger if that makes it easier for someone to help me.

JBuxton

i am an idiot

Platinum - Posts: 13,673

Joined: September 21, 2006

Location: Louisiana, United States

Posted: March 02, 2009 at 5:32 AM / IP Logged

Battery	YELLOW	(+)	IGNITION SWITCH HARNESS
Ignition 1	LIGHT GREEN/ VIOLET	(+)	IGNITION SWITCH HARNESS
Ignition 2	GRAY / YELLOW	(+)	IGNITION SWITCH HARNESS
Ignition 3	GRAY / YELLOW	(+)	IGNITION SWITCH HARNESS
Accessory 1	BLACK/ GREEN	(+)	IGNITION SWITCH HARNESS (HEAT A.C.)
Starter 1	RED / LIGHT BLUE	(+)	IGNITION SWITCH HARNESS
Anti-Theft Descript	NONE
Key Sense	BLACK/ PINK	(-)	IGNITION SWITCH HARNESS
Neutral Safety	RED / LIGHT BLUE	(+)	AT GEAR SELECTOR SWITCH
Tachometer	TAN / YELLOW	(-)	PCM PIN 48 OR COIL TOP OF MOTOR TAN/WHT
Speed Sense	GRAY/BLACK	(AC)	PASS REAR OF ENG POS 58 104 PIN PLUG
Parking Lights	BROWN	(+)	DR.KICK OR WHT/BLK AT SWITCH
Brake Lights	LIGHT GREEN	(+)	AT BRAKE SWITCH OR DRIVERS KICK
Reverse Lights	BLACK/ PINK	(+)	84 PIN CONN BEHIND DRIVERS DASH PIN 7
Horn	YELLOW/LIGHT GREEN	(-)	OR BLU AT STEERING COLUMN

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 ford ranger, audiovox 997

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.