factory disarm to unlock wire

Home / the12volt's Install Bay / Car Security and Convenience / factory disarm to unlock wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

timdareez

Member - Posts: 8

Joined: December 28, 2007

Location: British Columbia, Canada

Posted: March 02, 2009 at 12:11 PM / IP Logged

question for u all...

when hooking up the factory diarm wire to a unlock wire since it's both a neg trigger should i also diode isolate the unlock and factory disarm wire ???? or just hook it straight up ???

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: March 02, 2009 at 3:12 PM / IP Logged

Diode isolate. If you don't when you hit the unlock button on the door it will disarm, which you don't want. Sometimes i will use another output for disarm, like the dome light supervision wire. It gives a negative output when you disarm(even tho it is a one minute outpue it still will work fine for disarm).

Mike M2

Tech Manager

CS Dealer Services

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory disarm to unlock wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.