99 eclipse parking light wire

Home / the12volt's Install Bay / Car Security and Convenience / 99 eclipse parking light wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

benagy

Member - Posts: 11

Joined: January 14, 2008

Location: Indiana, United States

Posted: April 03, 2009 at 1:31 PM / IP Logged

Im pin the process of installing a viper 5901 in the 1999 mitsubishi eclipse. Im trying to map out all my wires first and in looking for the parking light wire it says it should be GREEN / WHITE in my kick panel but after looking there there seems to be 3 GREEN / WHITE wires there. Are these all the parking light wires? or am i looking in the wrong harness?

Back to Top

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: April 03, 2009 at 1:39 PM / IP Logged

If you were using a multimeter, you would be able to answer your own question. How are you going to do the install with no way to test wires?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 03, 2009 at 11:52 PM / IP Logged

mikvot wrote:

If you were using a multimeter, you would be able to answer your own question. How are you going to do the install with no way to test wires?

This is actually the PERFECT reply...... you know the color of the wire.... you have FOUND the wire, but ask a question like this? Hmmm.

Back to Top

benagy

Member - Posts: 11

Joined: January 14, 2008

Location: Indiana, United States

Posted: April 04, 2009 at 3:26 PM / IP Logged

yeaa i figured that out just wasn't sure if each wire controlled a different light. but moving on i am now confused on the light flash-isolation wire. why would the switch need to be isolated or what does this wire need to be connected to?

Back to Top

benagy

Member - Posts: 11

Joined: January 14, 2008

Location: Indiana, United States

Posted: April 13, 2009 at 10:56 PM / IP Logged

Alright so i got the alarm installed today and thought it was all good. I hooked up the harnesses to the 5901 unit and paired the lc3 remote. The alarm arms and disarms fine but now my power locks don't work. The door lock fuse is fine and the lock wire reads 12v normal but the unlock wire does not. What could have happened if the fuse is okay? or is there another fuse than the one in the fuse box in the driver kick panel. Could the relay go bad somehow? It seemed to click a few times when i was attaching the harness to the main unit. Also what would be the best place to mount the 5901 unit since the shock sensor is inside of it. The manual says not to attach it to metal or the steering column but where else would be a good place for the shock sensor? any input will help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 eclipse parking light wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.