viper 350hv siren problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 350hv siren problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nastynate2313

Member - Posts: 2

Joined: July 04, 2009

Location: California, United States

Posted: July 04, 2009 at 11:05 AM / IP Logged

I hope this is the correct place to post this but I have a problem with a Viper 350HV install on a 2007 Toyota Yaris.

When I was finished connecting all the wires the last one was the 12v constant and when I connected it the siren went on and stayed on. I tried to turn the alarm of with the remote and the alarm will arm and disarm but the siren stays on. I dont know what I did wrong but can someone help.

Thanks

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: July 04, 2009 at 1:21 PM / IP Logged

Check the ground for your siren. Also measure you siren output (brown) and make sure that it is not putting out 12V constant. If it is try to manually disarm it (valet switch once with IGN forward). If all else fails I would probably say bad brain.

nastynate2313

Member - Posts: 2

Joined: July 04, 2009

Location: California, United States

Posted: July 05, 2009 at 12:25 PM / IP Logged

Thanks I will try that.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 350hv siren problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.