96 gmc sonoma door locks?

Home / the12volt's Install Bay / Car Security and Convenience / 96 gmc sonoma door locks? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

joey61177

Member - Posts: 3

Joined: August 18, 2009

Location: Illinois, United States

Posted: August 18, 2009 at 9:20 PM / IP Logged

hello i have just installed a valet 561r and was geetting ready to wire up the door locks im not sure which system the truck uses ive looked at the diragrams and i am not sure to which diagram i should follow if anyone could help it would be great and thank you in advanced for the help

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 18, 2009 at 9:44 PM / IP Logged

Factory keyless entry, or not?

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

joey61177

Member - Posts: 3

Joined: August 18, 2009

Location: Illinois, United States

Posted: August 19, 2009 at 6:38 AM / IP Logged

You know I just bought the truck and I didn't receive any remotes with it so I'm not really sure. Is there a way that I could find out ?

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 19, 2009 at 6:27 PM / IP Logged

There are 2 ways to do the door locks on that vehicle. One way if it has Keyless and another way without. I will post info for both later tonight.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 19, 2009 at 7:24 PM / IP Logged

WIRE	COLOR	POLARITY	LOCATION
Power Unlock	WHITE	(+)	OR BLK/WHT REVERSE POLARITY
PowerLock	LIGHT BLUE	(+)	DRIVER'S KICK PANEL

After you test the above wires and confirm that they do go positive during lock or unlock, try applying power to one of them to see if the door locks or unlocks. If it does work, simply wire up 2 relays to pulse positive to these wires during the lock or unlock pulse from your alarm.

If applying power to the wire does not lock or unlock, we will have to do some additional wiring on the 2 relays.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

joey61177

Member - Posts: 3

Joined: August 18, 2009

Location: Illinois, United States

Posted: August 19, 2009 at 7:50 PM / IP Logged

very cool what your telling me is if the wires work out like you say i should wire it according to the three wire positive door locks diagram i will have to try this tomorrow thanks for all the help ill post my findings tomorrow hope it works again thanks for all the help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 gmc sonoma door locks?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.