viper 5701 in '99 '04 jeep grand cherokee

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 in '99 '04 jeep grand cherokee (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gunn1

Member - Posts: 14

Joined: December 09, 2008

Location: Maryland, United States

Posted: October 21, 2009 at 8:47 AM / IP Logged

A while ago I purchased a Viper 5701 and XK531 to install in a 2002 Jeep Grand Cherokee Laredo. Now I'm just getting back to it and actually want to get it installed soon, now that it is getting colder outside.

I have found a lot of information on this website that I have saved, about the '02 Jeep GC and have found some information on the 5701, but none a perfect match to my setup. I was just curious if there is anyone out there that has done a '99-'04 Jeep Grand Cherokee and installed a Viper 5701 with the XK531 module? Ideally looking for a wiring diagram of the setup. I do have a couple of specific questions, but first figured I'd like to find a match to my config, if possible.

Thanks,

Tom

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 21, 2009 at 6:46 PM / IP Logged

Just dive in, the XK531 will do everything that you need for remote start and security. The only catch is the programming for the Sentry key.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

gunn1

Member - Posts: 14

Joined: December 09, 2008

Location: Maryland, United States

Posted: October 22, 2009 at 8:33 AM / IP Logged

Thanks, I think I have the Sentry key programming figured out; it doesn't seem like a big deal?

I was planning to use the D2D hookup from the XK531 as that seems to take care of a bunch of things right there, but haven't been able to find a D2D cable. But I also see a lot of people going W2W. Is the D2D problematic?

Thanks,

Tom

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 22, 2009 at 4:23 PM / IP Logged

You may want to contact bypasskit.com for the D2D wire. I know iDatalink now has the DEI D2D wire available.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701 in '99 '04 jeep grand cherokee

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.