the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 771xv not cranking 2009 avenger


Post ReplyPost New Topic
< Prev Topic Next Topic >
buddahluvaz 
Member - Posts: 1
Member spacespace
Joined: October 31, 2009
Posted: October 31, 2009 at 6:58 PM / IP Logged  

I am trying to install a viper 771xv on a 2009 dodge avenger.  I have installed all the wiring and the pkucg2x module. i tried to program the module according to the directions. The alarm works but when i go to start the vehicle the system tries to start but the starter wont crank and the remote will flash the yellow light 3 times. i tried to put the key in the ignition and start it to see if thebypass is not working and still no cranking. The diagnostics do not seem to be working either.  The led will not flash when i try to put it into dianostics. any sugestions.

t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: November 01, 2009 at 1:51 PM / IP Logged  
Have you disconnected the bypass and then inserted the key and tried remote starting?
chadwa2003 
Copper - Posts: 353
Copper spacespace
Joined: January 08, 2005
Location: Canada
Posted: November 01, 2009 at 6:47 PM / IP Logged  
It sounds to be connection related. How did you wire the bypass module? Did you verify that the immobilzer programmed correctly? ie. starting the vehicle with the chip removed from the key using the bypass in place of the chip

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer