2005 sequoia remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2005 sequoia remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blancoloco412

Member - Posts: 3

Joined: September 09, 2009

Location: Virginia, United States

Posted: November 10, 2009 at 6:00 AM / IP Logged

Hi guys Doing a remote start on a 2005 Sequoia never really done a Toyota and was wondering if I could find the data Imo and Imi wires for the xk05 at the the ingnition where the key goes like on the Hondas. If not where would be the easiest place just a little confused by the instructions that the xk05 comes with.

bbb

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: November 10, 2009 at 8:36 PM / IP Logged

The XK05 sucks and you have to run wires all over the place. I've never used one of those on a Toyota, as competitors' products are so much better.

The Fortin KEY-OVERRIDE-SL2 or KEY-OVERRIDE-ALL, or any of the iDatalink pieces, are much much better, allowing all easy connections right at the keyswitch.

sequoia2006

Copper - Posts: 63

Joined: July 13, 2010

Location: Washington, United States

Posted: August 18, 2010 at 1:47 AM / IP Logged

I was wondering if you have successfully installed the remote starter with the XK05. I am planning to install the Viper 5901 on my sequoia 06 so if you have any tip or advice, it would be greatly appreciated.

Thanks.

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 18, 2010 at 5:34 AM / IP Logged

DEI has recently come out with a new version of firmware for the XK05. The older Toyota version, PKT2, worked OK but was difficult to install. The new version, 5.PKTI, is very easy to install. All to connections are at the ignition switch. I have used the XK05 & 5.PKTI setup on several Tundras' and Seinnas' with excellent results.

The firmware download is free, all you need is the XKLOADER cable. Here is alink to the XK05 info: http://www.xpresskit.com/product.aspx?productid=346

Update: The 5.PKTI firmware does not work on older Sequoias, only 2008-2010. The PKT2 firmware will work but has wires going behind the instrument cluster and the glovebox ( to the ECM ). iDatalink has a solution where all the wiring is done at the ignition switch.

Soldering is fun!

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: August 20, 2010 at 2:12 PM / IP Logged

use a PKALL or Idata ADS-TB....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

sequoia2006

Copper - Posts: 63

Joined: July 13, 2010

Location: Washington, United States

Posted: August 30, 2010 at 2:35 PM / IP Logged

kgerry wrote:

use a PKALL or Idata ADS-TB....

I did not find PKALL in the list of compatible modules so I went with the XK05 for the bypass and XK01 for door lock/unlock. They both work great. However with the XK05, I had to tap the IMO/IMI wires at the ECM.

zahidex

Member - Posts: 2

Joined: December 12, 2010

Location: Minnesota, United States

Posted: December 12, 2010 at 10:49 PM / IP Logged

http://www.xpresskit.com/VehicleCompatibility.aspx?p=-1&year=2005&make=Toyota&model=Sequoia&ps=1&s=0

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 sequoia remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.