led scaners

Home / the12volt's Install Bay / Car Security and Convenience / led scaners (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sonyguy936

Member - Posts: 6

Joined: October 12, 2009

Posted: November 11, 2009 at 10:50 PM / IP Logged

i have two led scaners, i want to hook them up two my alarm . does anyone no how to do this.

Sony Guy 936

Back to Top

sonyguy936

Member - Posts: 6

Joined: October 12, 2009

Posted: November 11, 2009 at 10:50 PM / IP Logged

the alarm is a prestiege xro 9100

Sony Guy 936

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: November 12, 2009 at 6:49 AM / IP Logged

The LED scanner should have three wires - power, ground, and ground when armed. Hook up the power to 12vdc, hook up the ground to ground, and hook up the ground when armed to the ground when armed output of the alarm. If there is any other device (like a relay) on the ground when armed wire you must diode isolate the current device with the new device.

Kevin Pierson

Back to Top

sonyguy936

Member - Posts: 6

Joined: October 12, 2009

Posted: November 12, 2009 at 3:49 PM / IP Logged

so ok when i hook up the 3rd wire where does it go to i tap into my alram led or what ..

Sony Guy 936

Back to Top

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: November 12, 2009 at 4:39 PM / IP Logged

hook up the ground when armed to the ground when armed output of the alarm. If there is any other device (like a relay) on the ground when armed wire you must diode isolate the current device with the new device.

Kevin Pierson

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led scaners

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.