viper 4203v with idatalink ads tb issues

Home / the12volt's Install Bay / Car Security and Convenience / viper 4203v with idatalink ads tb issues (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jferrarini

Member - Posts: 3

Joined: November 25, 2009

Location: Nebraska, United States

Posted: November 27, 2009 at 11:01 PM / IP Logged

I just installed a viper responder one remote start on my 05 F150. I have hooked everything correctly but I cannot get first or second status negative outputs to work. Ignition circuits turn one but no crank. The interface module has power, ground and ignition power. Is it possible that the outputs don't work. I have tried hooking the blue and blue/white wires to the input wire on the module with no result.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 27, 2009 at 11:34 PM / IP Logged

Did the module program properly ? What firmware version are you using on the TB ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jferrarini

Member - Posts: 3

Joined: November 25, 2009

Location: Nebraska, United States

Posted: November 27, 2009 at 11:43 PM / IP Logged

module programed properly the car started with the remote after cycling both keys. not sure on the firmware the box says s/w ko n1.5. I had two modules programed at the same time one for the f150 and one for a 05 explorer and the explorers remote start works correctly.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 28, 2009 at 11:22 AM / IP Logged

When the remote start is activated on the F150, does the LED on the module start flashing GREEN ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 4203v with idatalink ads tb issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.